v2-0119
type: CodeSystem
node role: treeRoot
id:
  v: v2-0119
text:
  status:
    v: generated
  div: Generated Narrative: CodeSystem v2-0119 Properties This code system defines the following properties for its concepts Name Code URI Type Description Status status http://hl7.org/fhir/concept-properties#status code A code that indicates the status of the concept deprecated v2-table-deprecated http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-table-deprecated code Version of HL7 in which the code was deprecated V2 Concept Comment v2-concComment http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concComment string V2 Concept Comment V2 Concept Comment As Published v2-concCommentAsPub http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concCommentAsPub string V2 Concept Comment As Published HL7 Concept Usage Notes HL7usageNotes http://terminology.hl7.org/CodeSystem/utg-concept-properties#HL7usageNotes string HL7 Concept Usage Notes Concepts This case-sensitive code system http://terminology.hl7.org/CodeSystem/v2-0119 defines the following codes in a Is-A hierarchy: Code Display Definition Status V2 Concept Comment V2 Concept Comment As Published HL7 Concept Usage Notes Deutsch (German, de) AF Order/service refill request approval AF is a response to RF where the placer authorizing a refill or quantity of refills. active Placer Applications . Placer Applications. AF is a response to RF where the placer authorizing a refill or quantity of refills. CA Cancel order/service request Cancel order/service request active Placer or Filler Applications Placer or Filler Applications.#xD; A cancellation is a request by the placer for the filler, or the filler to the placer, not to do a previously ordered service. Confirmation of the cancellation request is provided by the filler or placer, e.g., a message with an ORC-1-order control value of CR.#xD; Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel. Auftrag stornieren CH Child order/service Child order/service active Placer or Filler Applicati…
url:
  v: http://terminology.hl7.org/CodeSystem/v2-0119
identifier:
  system:
    v: urn:ietf:rfc:3986
  value:
    v: urn:oid:2.16.840.1.113883.18.48
version:
  v: 2.0.0
name:
  v: OrderControlCodes
title:
  v: orderControlCodes
status:
  v: active
experimental:
  v: false
date:
  v: 2019-12-01
publisher:
  v: Health Level Seven International
contact:
  telecom:
    system:
      v: url
    value:
      v: http://hl7.org
  telecom:
    system:
      v: email
description:
  v: HL7-defined code system of concepts which are used to determine the function of the order segment. Depending on the message, the action specified by one of these control codes may refer to an order or an individual service. Used in Version 2.x messaging of orders in the ORC segment.
purpose:
  v: Underlying Master Code System for V2 table 0119 (Order Control Codes)
copyright:
  v: This material derives from the HL7 Terminology (THO). THO is copyright ©1989+ Health Level Seven International and is made available under the CC0 designation. For more licensing information see: https://terminology.hl7.org/license.html
case sensitive:
  v: true
value set:
  v: http://terminology.hl7.org/ValueSet/v2-0119
  link: http://terminology.hl7.org/ValueSet/v2-0119
hierarchy meaning:
  v: is-a
compositional:
  v: false
version needed:
  v: false
content:
  v: complete
property:
  code:
    v: status
  uri:
    v: http://hl7.org/fhir/concept-properties#status
  description:
    v: A code that indicates the status of the concept
  type:
    v: code
property:
  code:
    v: v2-table-deprecated
  uri:
    v: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-table-deprecated
  description:
    v: Version of HL7 in which the code was deprecated
  type:
    v: code
property:
  code:
    v: v2-concComment
  uri:
    v: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concComment
  description:
    v: V2 Concept Comment
  type:
    v: string
property:
  code:
    v: v2-concCommentAsPub
  uri:
    v: http://terminology.hl7.org/CodeSystem/utg-concept-properties#v2-concCommentAsPub
  description:
    v: V2 Concept Comment As Published
  type:
    v: string
property:
  code:
    v: HL7usageNotes
  uri:
    v: http://terminology.hl7.org/CodeSystem/utg-concept-properties#HL7usageNotes
  description:
    v: HL7 Concept Usage Notes
  type:
    v: string
concept:
  id:
    v: 1359
  code:
    v: AF
  display:
    v: Order/service refill request approval
  definition:
    v: AF is a response to RF where the placer authorizing a refill or quantity of refills.
  property:
    code:
      v: v2-concComment
    value: string
      v: Placer Applications .
  property:
    code:
      v: v2-concCommentAsPub
    value: string
      v: Placer Applications. AF is a response to RF where the placer authorizing a refill or quantity of refills.
  property:
    code:
      v: status
    value: code
      v: active
concept:
  id:
    v: 1360
  code:
    v: CA
  display:
    v: Cancel order/service request
  definition:
    v: Cancel order/service request
  designation:
    language:
      v: de
    use:
      system:
        v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
      code:
        v: preferredForLanguage
    value:
      v: Auftrag stornieren
  property:
    code:
      v: v2-concComment
    value: string
      v: Placer or Filler Applications
  property:
    code:
      v: v2-concCommentAsPub
    value: string
      v: Placer or Filler Applications. A cancellation is a request by the placer for the filler, or the filler to the placer, not to do a previously ordered service. Confirmation of the cancellation request is provided by the filler or placer, e.g., a message with an ORC-1-order control value of CR. Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel.
  property:
    code:
      v: status
    value: code
      v: active
concept:
  id:
    v: 1361
  code:
    v: CH
  display:
    v: Child order/service
  definition:
    v: Child order/service
  designation:
    language:
      v: de
    use:
      system:
        v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
      code:
        v: preferredForLanguage
    value:
      v: nachgeordneter Auftrag
  property:
    code:
      v: v2-concComment
    value: string
      v: Placer or Filler Applications.
  property:
    code:
      v: v2-concCommentAsPub
    value: string
      v: Placer or Filler Applications. Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion.
  property:
    code:
      v: HL7usageNotes
    value: string
      v: Used in conjunction with the PA - Parent order control code. Refer to PA order control code for discussion.
  property:
    code:
      v: status
    value: code
      v: active
concept:
  id:
    v: 1362

v: CN

v: Combined result

v: Combined result

language:
  v: de
use:
  system:
    v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
  code:
    v: preferredForLanguage
value:
  v: Kumulatives Ergebnis (zu mehreren Aufträgen)

code:
  v: v2-concComment
value: string
  v: Filler Applications.

code:
  v: v2-concCommentAsPub
value: string
  v: Filler Applications. The combined result code provides a mechanism to transmit results that are associated with two or more orders. This situation occurs commonly in radiology reports when the radiologist dictates a single report for two or more exams represented as two or more orders. For example, knee and hand films for a rheumatoid arthritis patient might generate a single dictation on the part of the radiologist. When such results are reported the CN code replaces the RE code in all but the last ORC, and the results follow the last ORC and its OBR. An example follows of a single report following three ORCs: MSH|...<cr> PID|...<cr> ORC|CN|...<cr> OBR|1|A4461XA^HIS|81641^RAD|73666^Bilateral Feet|...<cr> ORC|CN|...<cr> OBR|2|A4461XB^HIS|81642^RAD|73642^Bilateral Hand PA|...<cr> ORC|RE|...<cr> OBR|3|A4461XC^HIS|81643^RAD|73916^Bilateral Knees|...<cr> OBX|1|CE|73916&IMP|1|Radiologist’s Impression|...<cr> OBX|2|CE|73642&IMP|1|Radiologist’s Impression|...<cr> OBX|3|FT|73642&GDT|1|Description|...<cr>

code:
  v: status
value: code
  v: active

id:
  v: 1363
code:
  v: CP
display:
  v: Cancel process step
definition:
  v: Cancel process step
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. The control code CP – Cancel process step should be used in the ORC-1 for communication Filler-to-Filler, e.g., LIS-to-Analyzer, to differentiate from code CA (Placer-to-Filler). The Filler should response with an acceptance of the cancellation using ORC-1 = CR and ORC-5 = CA.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1364
code:
  v: CR
display:
  v: Canceled as requested
definition:
  v: Canceled as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag anweisungsgemäß storniert
property:
  code:
    v: v2-concComment
  value: string
    v: Filler or Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler or Placer Applications. A response by the filler or placer application that a request to cancel (CA by the placer application) was performed successfully.
property:
  code:
    v: HL7usageNotes
  value: string
    v: A response by the filler or placer application that a request to cancel (CA by the placer application) was performed successfully.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1365
code:
  v: DC
display:
  v: Discontinue order/service request
definition:
  v: Discontinue order/service request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsausführung abbrechen
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. A request by the placer for the filler, or the filler to the placer, to discontinue a previously requested service. The differentiation between discontinue and cancel is that discontinue effects the order/service and all future occurrences, cancel refers to just the present action. Typical responses include, but are not limited to, CR – Cancelled as requested, UC – Unable to Cancel.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1366
code:
  v: DE
display:
  v: Data errors
definition:
  v: Data errors
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Datenfehler
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1367
code:
  v: DF
display:
  v: Order/service refill request denied
definition:
  v: Order/service refill request denied
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. In response to a Filler application requesting refill authorization (RF), DF indicates that the placer does not authorize refills for the order. ORC-16 Order Control Code reason may be used to indicate the reason for the request denial. Some suggested values include: AA Patient unknown to the provider AB Patient never under provider care AC Patient no longer under provider care AD Patient has requested refill too soon AE Medication never prescribed for the patient AF Patient should contact provider first AG Refill not appropriate Note that these values originate from the NCPDP SCRIPT Response Segment Code List Qualifiers. Materials Reproduced with the consent of ©National Council for Prescription Drug Programs, Inc. 1988, 1992, 2002 NCPDP.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1368
code:
  v: DR
display:
  v: Discontinued as requested
definition:
  v: Discontinued as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsausführung anweisungsgemäß abgebrochen
property:
  code:
    v: v2-concComment
  value: string
    v: Filler or Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler or Placer Applications. The filler or placer, in response to a request to discontinue (DC from the placer or filler application), has discontinued the order/service.
property:
  code:
    v: HL7usageNotes
  value: string
    v: The filler or placer, in response to a request to discontinue (DC from the placer or filler application), has discontinued the order/service.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1369
code:
  v: FU
display:
  v: Order/service refilled, unsolicited
definition:
  v: Order/service refilled, unsolicited
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. FU notifies the placer that the filler issued a refill for the order at the patient's request.
property:
  code:
    v: HL7usageNotes
  value: string
    v: FU notifies the placer that the filler issued a refill for the order at the patient's request.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1370
code:
  v: HD
display:
  v: Hold order request
definition:
  v: Hold order request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsbearbeitung aussetzen
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. Typical responses include, but are not limited to, CR - Cancelled as requested, UC - Unable to Cancel.
property:
  code:
    v: HL7usageNotes
  value: string
    v: Typical responses include, but are not limited to, CR - Cancelled as requested, UC - Unable to Cancel.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1371
code:
  v: HR
display:
  v: On hold as requested
definition:
  v: On hold as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsbearbeitung anweisungsgemäß ausgesetzt
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1372
code:
  v: LI
display:
  v: Link order/service to patient care problem or goal
definition:
  v: Link order/service to patient care problem or goal
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. Refer to Chapter 12 Patient Care for complete discussion.
property:
  code:
    v: HL7usageNotes
  value: string
    v: Refer to Chapter 12 Patient Care for complete discussion.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1373
code:
  v: MC
display:
  v: Miscellaneous Charge - not associated with an order
definition:
  v: Miscellaneous Charge - not associated with an order
property:
  code:
    v: v2-concComment
  value: string
    v: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
property:
  code:
    v: HL7usageNotes
  value: string
    v: applies to DFT^P03^DFT_P03 and DFT^P11^DFT_P11
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1374
code:
  v: NA
display:
  v: Number assigned
definition:
  v: Number assigned
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Nummer zugewiesen
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. There are three circumstances that involve requesting an order number (ORC-2-placer order number or ORC-3-filler order number): (1) When the filler application needs to request an ORC-3-filler order number from a centralized application (e.g., HIS). SN – The send order number code provides a mechanism for the filler to request an ORC-3-filler order number from some centralized application (called “other” in the table below), such as a central HIS, by sending an ORM message containing an ORC-1-order control value of SN. This ORC has a null ORC-3-filler order number and an ORC-2-placer order number created by the filler application when the filler originates the order. The order (SN type) message can be acknowledged by either one of two methods: a) By an order application acknowledgement message containing an ORC-1-order control value of OK. Then an unsolicited order message can be sent at a future time, containing an ORC with ORC-1-order control value of NA to provide the actual number assigned. b) By an order acknowledgement message containing an ORC-1-order control value of NA as described below. NA – The number assigned code allows the “other” application to notify the filler application of the newly-assigned filler order number. ORC-1-order control contains value of NA, ORC-2-placer order number (from the ORC with the SN value), and the newly-assigned filler order number. Code From ORC-2-Placer Order Number ORC-3-Filler Order Number SN filler application placer order number^filler application ID Null NA other application placer order number^filler application ID filler order number^filler application ID Note: Both the placer order number and the filler order number have the filler’s application ID (2) When the filler application needs to request an ORC-2-placer order number from some other application (e.g., Order Entry). SN – The send order number code provides a mechanism for the filler application to request an ORC-2-placer order number fr…
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1375
code:
  v: NR
display:
  v: Notification Received
definition:
  v: Notifies the Filler that the Placer received a cancellation, discontinuance, or other state change notice
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1376
code:
  v: NW
display:
  v: New order/service
definition:
  v: New order/service
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Neuer Auftrag
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. See comments for NA - Number Assigned.
property:
  code:
    v: HL7usageNotes
  value: string
    v: See comments for NA - Number Assigned.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1377
code:
  v: OC
display:
  v: Order/service canceled
definition:
  v: Order/service canceled
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag storniert
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1378
code:
  v: OD
display:
  v: Order/service discontinued
definition:
  v: Order/service discontinued
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsausführung abgebrochen
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1379
code:
  v: OE
display:
  v: Order/service released
definition:
  v: Order/service released
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1380
code:
  v: OF
display:
  v: Order/service refilled as requested
definition:
  v: Order/service refilled as requested
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. OF directly responds to the placer system's request for a refill.
property:
  code:
    v: HL7usageNotes
  value: string
    v: OF directly responds to the placer system's request for a refill.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1381
code:
  v: OH
display:
  v: Order/service held
definition:
  v: Order/service held
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsbearbeitung ausgesetzt
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1382
code:
  v: OK
display:
  v: Order/service accepted & OK
definition:
  v: Order/service accepted & OK
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag akzeptiert
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. See comments for NA - Number Assigned.
property:
  code:
    v: HL7usageNotes
  value: string
    v: See comments for NA - Number Assigned.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1383
code:
  v: OP
display:
  v: Notification of order for outside dispense
definition:
  v: Notification of order for outside dispense
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. These order control codes are used to communicate an order between systems where the order is intended for informational purposes. For example, an order that will be performed by a vendor outside the enterprise of communicating systems. The communicating systems may need to maintain information relative to the order for clinical continuity, but no actions to perform the ordered service are intended. OP represents an informational version of NW, PY represents the informational-only version of RO. NW and RO table notes also apply to OP and PY, respectively.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1384
code:
  v: OR
display:
  v: Released as requested
definition:
  v: Released as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsbearbeitung anweisungsgemäß wiederaufgenommen
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1385
code:
  v: PA
display:
  v: Parent order/service
definition:
  v: Parent order/service
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Hauptauftrag
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. The parent (PA) and child (CH) order control codes allow the spawning of “child” orders from a “parent” order without changing the parent (original order). One or more ORC segments with an ORC-1-order control value of PA are followed by one or more ORC segments with an ORC-1-order control value of CH. Whether OBR segments must be present is determined by the value of ORC-6-response flag. For example, suppose that a microbiology culture produced two organisms and corresponding susceptibility reports. Then the sequence of segments would be as follows: (see figure 4-4) The assignment of placer order numbers in the parent-child paradigm depends on whether the placer or filler creates the child order and in the latter case, on whether the placer supports the SN/NA transaction. If the placer creates the child orders it will assign their placer order numbers according to its usual procedures. If the filler creates the child orders there are two possibilities: each child will inherit the placer order number of its parent, or the filler will use the SN/NA transaction to request that the placer assign a placer order number. In either case, the filler application creates the filler order numbers of the children according to its usual procedures. Whenever a child order is transmitted in a message the ORC segment’s ORC-8-parent is valued with the parent’s filler order number (if originating from the filler) and with the parent’s placer order number (if originating from the filler or if originating from the placer). The parent child mechanism can be used to “expand” a parent order (e.g., an order for three EKGs on successive mornings).
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1386
code:
  v: PR
display:
  v: Previous Results with new order/service
definition:
  v: Previous Results with new order/service
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. PR indicates that this ORC is part of an ORU structure containing previous observation, which is embedded in the order. At least two main use cases require that the complete results of the previous observations be transmitted with the order. • Diagnostic laboratories referring tests to another lab for either confirmation of results (HIV, etc.) or due to not being equipped to do the tests (genetic testing, etc.). • Diagnostic laboratories sending test results to Knowledge Bases for the automated generation of diagnostic comments for inclusion into the lab report.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1387
code:
  v: PY
display:
  v: Notification of replacement order for outside dispense
definition:
  v: Notification of replacement order for outside dispense
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. See comments for OP - Notification of order for outside dispense.
property:
  code:
    v: HL7usageNotes
  value: string
    v: See comments for OP - Notification of order for outside dispense.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1388
code:
  v: RA
display:
  v: Recommendation Accepted
definition:
  v: Identifies that this previously recommended replacement order has been accepted
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications: Used in the Recommendation Accepted message; includes the assigned placer order number for the accepted replacement order Filler Applications: Used in the acknowledgment response message to the Recommendation Accepted message
property:
  code:
    v: status
  value: code
    v: N

id:
  v: 1389
code:
  v: RC
display:
  v: Recommended Change
definition:
  v: Identifies that this OBR represents a recommended replacement order
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications. Used in the recommendation message sent to the placer
property:
  code:
    v: status
  value: code
    v: N

id:
  v: 1390
code:
  v: RD
display:
  v: Recommendation Declined
definition:
  v: Identifies that this previously sent recommended replacement order has been declined
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications: Used in the Recommendation Declined message Filler Applications: Used in the acknowledgment response message to the Recommendation Declined message
property:
  code:
    v: status
  value: code
    v: N

id:
  v: 1391
code:
  v: RE
display:
  v: Observations/Performed Service to follow
definition:
  v: Observations/Performed Service to follow
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Untersuchungsergebnisse folgen (in späteren Segmenten dieser Nachricht)
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. The observations-to-follow code is used to transmit patient-specific information with an order. An order detail segment (e.g., OBR) can be followed by one or more observation segments (OBX). Any observation that can be transmitted in an ORU message can be transmitted with this mechanism. When results are transmitted with an order, the results should immediately follow the order or orders that they support. The following example shows the sequence of segments for three Pharmacy orders. It illustrates the use of the RE code: Segment Order Control Comment MSH PID ORC NW First new order RXO First order segment ORC NW 2nd new order RXO 2nd order segment [ORC RE Patient-specific observation, optional in V 2.2 OBR] Observation OBR, optional in V 2.2 OBX An observation segment OBX Another observation segment OBX Another observation segment OBX Another observation segment ORC NW 3rd order RXO 3rd order segment In this version of HL7, results can be transmitted with an order as one or more OBX segments without the necessity of including the ORC and OBR segments. Observations can be transmitted in an ORU message without using an ORC. There are times when it is necessary to transmit information not included in the OBR segments of the ORU message. In this case, it is recommended that the ORC be included in the ORU message. The order control value of RE is required only in ORM messages to indicate that an order is followed by observation results (OBX). The RE code is not necessary in the ORU message because it is expected that the OBR segments can be followed by observation results (OBX).
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1392
code:
  v: RF
display:
  v: Refill order/service request
definition:
  v: Refill order/service request
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. RF accommodates requests by either the filler or the placer. The filler may be requesting refill authorization from the placer. A placer system may be requesting a refill to be done by the filler system. Typical responses include, but are not limited to: For a Filler request AF – Order/service refill request approval, DF – Order/service refill request denied; for a Placer request RE – Observations/Performed Service to follow, UF – Unable to refill.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1393
code:
  v: RL
display:
  v: Release previous hold
definition:
  v: Release previous hold
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsberabeitung wiederaufnehmen
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1394
code:
  v: RO
display:
  v: Replacement order
definition:
  v: Replacement order
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Ersatzauftrag
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. The replaced orders are treated as though they were canceled. If and when an ordered service can be replaced are local site-specific determinations. Use the parent/child order control codes if the site specifies that the original order must remain intact. Do not use the replacement codes under this circumstance. For each order to be replaced, use an ORC-1-order control value of RP (request for a replacement going to a filler) or RU (an unsolicited replacement created by the filler) used by the filler to notify the placer and/or other systems). By local agreement, the ORC segment (with RP or RU) may be followed by its original order detail segment. The ORC segments (with RP or RU) must be followed by an ORC segment with an ORC-1-order control value of RO (indicating the replacement order). By local agreement, the ORC with the RO value may be followed by an order detail segment. For example, suppose that an ancillary application were replacing two OBR orders with three different orders. The sequence of segments would be as follows: Seg Order Control Comment ORC RU 1st replaced ORC OBR 1st replaced order’s detail segment ORC RU 2nd replaced ORC OBR 2nd replaced order’s detail segment ORC RO 1st replacement ORC OBR 1st replacement order’s detail segment ORC RO 2nd replacement ORC OBR 2nd replacement order’s detail segment ORC RO 3rd replacement ORC OBR 3rd replacement order’s detail segment Whether the OBR segments must be present is determined by the value of ORC-6-response flag. The described replacement method will handle all possible cases of replacement: one into one, many into one, one into many, and many into many. If the placer sent this request to the filler with two RPs, and this was a response back from the filler to the placer, the two RUs (replaced unsolicited) would be two RQs (replaced as requested). (see figure 4-3) Seg Orde…
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1395
code:
  v: RP
display:
  v: Order/service replace request
definition:
  v: Order/service replace request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag ersetzen
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The order replace request code permits the order filler to replace one or more new orders with one or more new orders, at the request of the placer application. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1396
code:
  v: RQ
display:
  v: Replaced as requested
definition:
  v: Replaced as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag anweisungsgemäß ersetzt
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The order replace request code permits the order filler to replace one or more new orders with one or more new orders, at the request of the placer application. The replacement order code is sent by the filler application to another application indicating the exact replacement ordered service. It is used with the RP and RU order control codes as described above. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1397
code:
  v: RR
display:
  v: Request received
definition:
  v: Request received
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Anforderung erhalten
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. Left in for backward compatibility. In the current version it is equivalent to an accept acknowledgment. The request-received code indicates that an order message has been received and will be processed later. The order has not yet undergone the processing that would permit a more exact response.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1398
code:
  v: RU
display:
  v: Replaced unsolicited
definition:
  v: Replaced unsolicited
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag ersetzt (ohne Anweisung)
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. A replacement is the substitution of one or more orders for one or more previously ordered services. See comment 1 on RO – Replacement Order for further discussion. The unsolicited replacement code permits the filler application to notify another application without being requested from the placer application. The rules for the order numbers in ORC segments with an order control value of RO are determined by the replacement type (RP or RU). In the case of the RU type (i.e., unsolicited replacement by the filler), the filler order number is generated as usual by the filler application. The placer order number is identical to the placer order number of the first transmitted ORC with an order control value of RU. In the case of the RP type (i.e., a replacement request from another application to the filler), the placer order number is generated by the placer application using the procedure for new orders. The filler order number is generated by the filler application using the procedure identical for new orders. If a replacement sequence is used in an ORU message (i.e., during results reporting), the following are the recommended segments to be used for the replacement orders: a) ORC with an order control value of RO b) Any OBR segments (can be replaced by any order detail segments) c) Optionally followed by observation result segments (OBX) d) NTE segments can appear after the OBR (or any order detail segment) or after an OBX segment as in a regular ORU message
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1399
code:
  v: SC
display:
  v: Status changed
definition:
  v: Status changed
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Statusänderung
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1400
code:
  v: SN
display:
  v: Send order/service number
definition:
  v: Send order/service number
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrags- bzw. Bearbeitungsnummer zuweisen / übermitteln
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications. See comments for NA - Number Assigned.
property:
  code:
    v: HL7usageNotes
  value: string
    v: See comments for NA - Number Assigned.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1401
code:
  v: SQ
display:
  v: Supplemented as requested
definition:
  v: Supplementation confirmation message indicating that an order was supplemented as requested.
property:
  code:
    v: v2-concComment
  value: string
    v: This code is used in the acknowledgment response to the request messages.
property:
  code:
    v: status
  value: code
    v: N

id:
  v: 1402
code:
  v: SR
display:
  v: Response to send order/service status request
definition:
  v: Response to send order/service status request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsstatus (Antwort)
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1403
code:
  v: SS
display:
  v: Send order/service status request
definition:
  v: Send order/service status request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsstatus senden
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1404
code:
  v: SU
display:
  v: Supplement this order
definition:
  v: Identifies existing orders to be supplemented in Supplementation Recommendation (filler to placer) and Supplementation Request (placer to filler) messages.
property:
  code:
    v: v2-concComment
  value: string
    v: For example this code is used in the filler’s order message to identify an order that is missing a recommended order based on organizational protocol for example as described in the IHE Laboratory Communication (LCC) profile (LAB-6).
property:
  code:
    v: status
  value: code
    v: N

id:
  v: 1405
code:
  v: UA
display:
  v: Unable to accept order/service
definition:
  v: Unable to accept order/service
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsannahme nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. An unable to accept code is used when a new order cannot be accepted by the filler. Possible reasons include requesting a prescription for a drug which the patient is allergic to or for an order which requires certain equipment resources which are not available such that the order cannot be filled. Note that this is different from the communication level acceptance as defined within the MSA segment.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1406
code:
  v: UC
display:
  v: Unable to cancel
definition:
  v: Unable to cancel
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftragsstornierung nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler or Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler or Placer Applications. An unable-to-cancel code is used when the ordered service is at a point that it cannot be canceled by the placer or filler or when local rules prevent cancellation by the filler. The use of this code is dependent on the value of ORC-6-response flag. If the filler initiated the request to cancel and the placer is unable to cancel while the filler cannot proceed with the fulfillment of that order, then the necessary communication to resolve the conflict is outside the scope of these messages.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1407
code:
  v: UD
display:
  v: Unable to discontinue
definition:
  v: Unable to discontinue
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Abbrechen nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler or Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler or Placer Applications. An unable-to-discontinue code is used when the ordered service is at a point that it cannot be discontinued by the placer or filler or when local rules prevent discontinuance by the filler. The use of this code is dependent on the value of ORC-6-response flag. If the filler initiated the request to discontinue and the placer is unable to discontinue while the filler cannot proceed with the fulfillment of that order, then the necessary communication to resolve the conflict is outside the scope of these messages.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1408
code:
  v: UF
display:
  v: Unable to refill
definition:
  v: Unable to refill
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications. Negative response to RF Refill order/service request, indicating that the receiving application was not able to complete the refill request.
property:
  code:
    v: HL7usageNotes
  value: string
    v: Negative response to RF Refill order/service request, indicating that the receiving application was not able to complete the refill request.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1409
code:
  v: UH
display:
  v: Unable to put on hold
definition:
  v: Unable to put on hold
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Aussetzen nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1410
code:
  v: UM
display:
  v: Unable to replace
definition:
  v: Unable to replace
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Ersetzen nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1411
code:
  v: UN
display:
  v: Unlink order/service from patient care problem or goal
definition:
  v: Unlink order/service from patient care problem or goal
property:
  code:
    v: v2-concComment
  value: string
    v: Placer or Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer or Filler Applications. Refer to Chapter 12 Patient Care for complete discussion.
property:
  code:
    v: HL7usageNotes
  value: string
    v: Refer to Chapter 12 Patient Care for complete discussion.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1412
code:
  v: UR
display:
  v: Unable to release
definition:
  v: Unable to release
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Wiederaufnahme nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1413
code:
  v: UX
display:
  v: Unable to change
definition:
  v: Unable to change
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Änderung nicht möglich
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1414
code:
  v: XO
display:
  v: Change order/service request
definition:
  v: Change order/service request
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag ändern
property:
  code:
    v: v2-concComment
  value: string
    v: Placer Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Placer Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1415
code:
  v: XR
display:
  v: Changed as requested
definition:
  v: Changed as requested
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag anweisungsgemäß geändert
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active

id:
  v: 1416
code:
  v: XX
display:
  v: Order/service changed, unsol.
definition:
  v: Order/service changed, unsol.
designation:
  language:
    v: de
  use:
    system:
      v: http://terminology.hl7.org/CodeSystem/hl7TermMaintInfra
    code:
      v: preferredForLanguage
  value:
    v: Auftrag geändert (ohne Anweisung)
property:
  code:
    v: v2-concComment
  value: string
    v: Filler Applications.
property:
  code:
    v: v2-concCommentAsPub
  value: string
    v: Filler Applications.
property:
  code:
    v: status
  value: code
    v: active