Table of codes specifying a patient's sex.

Table of codes specifying a person's marital (civil/legal) status.

HL7-defined table of codes specifying the trigger event for Version 2.x interface messages.

Table of codes used by systems to categorize patients by site in HL7 Version 2.x interfaces.

Table of codes specifying the patient's race. These values are suggestions only, they are not required for use in HL7 messages.

Table of codes specifying a person's religion.

Table of codes specifying the circumstances under which the patient was or will be admitted.

HL7-defined table of codes specifying acknowledgment codes used in Version 2.x message. For details of usage, see message processing rules in the published Standard.

Table of codes specifying permanent or transient handicapped conditions of a person.

Table of codes specifying the attending physician information. No suggested values.

Table of codes for charging system. Not used after HL7 2.1. No suggested values.

Table of codes specifying the stock location. Table is no longer published as part of the relased standard after version 2.2.

Table of codes that identify reasons for patient isolation. Not used after HL7 2.1.

Table of codes specifying a type of financial transaction.

Table of codes specifying the patient type. No suggested values.

Table of codes specifying the anesthesia used during the procedure. No suggested values.

Not used in HL7 Version 2.x messaging; publishing artifact.

Table of codes specifying the bad debt agency to which the account was transferred. No suggested values.

Table of codes specifying whether the particular insurance has been billed and, if so, the type of bill. No suggested values.

Table of codes specifying where the patient was admitted. No suggested values.

Table of codes specifying the appropriate fee schedule to be used for this transaction posting. No suggested values.

HL7-defined table of codes specifying the allowed priorities for obtaining the specimen.

Table of codes specifying which price schedule is to be used for room and bed charges. No suggested values.

Table of codes that indicate a means of administrating a medication dose. As of HL7 version 2.3, it was replaced by tables 0162 Route of Administration and table 0165 Administration Method.

Table of codes specifying a location on the body where a dose is to be administered, e.g., IV, IM, Subcutaneous. Used in HL7 Version 2.1 messaging only in the RX1 segment; as of version 2.2 it has been replaced with table 0163 Body Site.

HL7-defined table of codes specifying the status of an order. The purpose of these values are to report the status of an order either upon request (solicited), or when the status changes (unsolicited). The values are not intended to initiate action. It is assumed that the order status value always reflects the status as it is known to the sending application at the time that a message is sent. Only the filler can originate these values.

Table of codes specifying an insurance company plan uniquely. No suggested values.

Table of codes specifying the condition code. These codes are defined by CMS or other regulartory agencies. No suggested values.

Table of codes specifying the type of contract entered into by the healthcare facility and the guarantor for the purpose of settling outstanding account balances. No suggested values.

Table of codes specifying whether the patient will be extended certain special courtesies. No suggested values.

Table of codes specifying past credit experience. No suggested values.

HL7-defined table of concepts which specify actions to be taken with respect to the specimens that accompany or precede an order. The purpose of these are to further qualify (when appropriate) the general action indicated by the order control code (code system 2.16.840.1.133883.18.25).

HL7-defined table of concepts which specify the kind of information that is required to satisfy a query request. The values define the type of transaction inquiry.

Table of codes specifying the department code that controls the transaction code. No suggested values.

Table of codes specifying the type of accident. No suggested values.

Table of codes specifying the primary diagnosis code for billing purposes. No suggested values.

Table of codes that specify a type of diagnosis being sent.

Table of codes specifying a diagnosis coding method. No suggested values. Table is no longer published as part of the released standard after version 2.5.1.

Table of codes specifying the diagnostic related group (DRG) for the transaction. No suggested values.

Table of codes specifying that the grouper results have been reviewed and approved. No suggested values.

HL7-defined table of concepts which specify a categorical assessment of an observation value (carried in HL7 V2.x field OBX.5), such as "Normal", "Abnormal", "Positive", "Negative", "Resistant", "Susceptible", etc.

Table of codes specifying the type of consent that was obtained for permission to treat the patient. No suggested values.

Table of codes that identify an error. Not used after HL7 2.2. No suggested values.

HL7-defined table of codes specifying the check digit scheme employed.

Table of codes which specify the reason for an event.

Table of codes specifying an actual personal relationship that the next of kin/associated party has to a patient.

Table of codes specifying the financial class assigned to a person. No suggested values.

HL7-defined table of codes which specify actions to be taken with respect to the specimens that accompany or precede an order. The purpose of these are to further qualify (when appropriate) the general action indicated by the order control code ( table 0119).

Table of codes specifying the guarantor's employment status.

Table of codes specifying the type of guarantor, e.g., individual, institution, etc. No suggested values.

Table of codes specifying the treatment or type of surgery the patient is scheduled to receive.

HL7-defined table of concepts which specify sources for speciments for clinical testing. These concepts are used in HL7 Version 2.x messaging in the OBR segment prior to version 2.7, and was replaced by the concepts in table 0487 Specimen Type and table 0488 Specimen Collection Method as of version 2.5 and thereafter.

Table of codes specifying the identifier of an insurance plan with which a transaction should be associated. No suggested values.

Table of codes specifying the amount of interest that will be charged the guarantor on any outstanding amounts. No suggested values.

HL7-defined table of codes which specify a section of a diagnostic service where an observation may be performed.

Table of codes for report types. Not used after HL7 2.1. No suggested values.

HL7-defined table of codes which specify message types.

HL7-defined table of codes which specify a categorical assessment of an observation value.

Table of codes that identify a bed location. Not used after HL7 v2.2 No suggested values.

HL7-defined table of codes specifying the nature of an abnormal test.

HL7-defined table of concepts which are used to specify the source of a comment, as used in HL7 Version 2.x messaging in the NTE segment.

Table of codes specifying the type of outlier (i.e. period of care beyond DRG-standard stay in facility) that has been paid.

Table of codes specifying a composite number/name of a person/group that performed a test/procedure/transaction, etc. No suggested values.

HL7-defined table of codes which specify observation result status. These codes reflect the current completion status of the results for one Observation Identifier.

Table of codes specifying the coding structure that identifies the various plan types (i.e., Medicare, Medicaid, Blue Cross, HMO, etc.). No suggested values.

Table of codes specifying whether the patient must have pre-admission testing done in order to be admitted. No suggested values.

Table of codes specifying a unique identifier assigned to a procedure, if any, associated with a charge.

Table of codes that specify the methodology used to assign a code to a procedure (CPT4, for example). Used for backwards-compatibility purposes. No suggestted values.

Table of codes that further define a type of procedure. Not used after HL7 2.2. No suggested values.

HL7-defined table of codes which specify a time frame in which a querry response is expected.

Table of codes which are used to specify that a patient is being re-admitted to a healthcare facility from which they were discharged, and indicates the circumstances around such re-admission.

Table of codes specifying whether the healthcare provider can release information about a patient and what information can be released.

Table of codes that indicate if the insurance sends a report indication that the patient is eligible for benefits and identifying what those benefits are. Replaced by table 0136 after HL7 2.2. No suggested values.

HL7-defined table of concepts which, for an order, indicate the amount of information to be returned from the filler for the response to the order. Sometimes the requested level of response may not be possible immediately, but when it is possible, the filler (receiving) application must send the information. Used in HL7 Version 2.x messaging in the ORC segment.

Table of codes which specify codes to further identify an insurance plan.

Table of codes specifying a type of VIP. No suggested values.

HL7-defined table of codes which specify codes for an event precipitating/triggering a charge activity.

HL7-defined table of concepts which specify the maximum length of a query response that can be accepted by a requesting system, and are expressed as units of mesaure of query response objects. Used in HL7 Version 2.x query messaging.

HL7-defined table of concepts which specify a response type used in deferred processing two phase reply for delayed acknowldgement mode of the original acknowledgement mechanism defined in HL7 Version 2.x messaging.

HL7-defined table of codes which specify whether the message is part of a production, training or debugging system.

HL7-defined table of codes which are used to identify an HL7 version in the Version 2.x family of published standards.

HL7-defined table of codes which are used to specify the source of a comment.

HL7-defined table of concepts which specify which of several types of formats for data to be returned in response to a query.

HL7-defined table of concepts which specify which type of deferred query resonse is desired, as specified with the query parameters.

HL7-defined table of concepts which are used to control level of detail in query results.

HL7-defined table of concepts which specify the priority associated with a report or update run using a query.

Table of codes specifying that the account was transferred to bad debts and gives the reason. No suggested values.

Table of codes specifying that the account was deleted from the file and gives the reason. No suggested values.

Table of codes which specify the disposition of the patient at time of discharge (i.e., discharged to home, expired, etc.). No suggested values. In the US, this field should use the Official Uniform Billing (UB) 04 2008 numeric codes found on form locator 17.

Table of codes specifying the healthcare facility to which the patient was discharged. No suggested values.

Table of codes specifying a special diet type for a patient. No suggested values.

Table of codes specifying the healthcare facility with which this visit is associated in a multiple facility environment. No suggested values.

Table of codes which specify the state of a bed in an inpatient setting, and is used to determine if a patient may be assigned to it or not.

Table of codes specifying the account status. No suggested values.

Table of codes specifying the major diagnostic category. No suggested values.

HL7-defined table of codes which are used to determine the function of the order segment. Depending on the message, the action specified by one of these control codes may refer to an order or an individual service.

HL7-defined table of codes allowing the placer (sending) application to determine the amount of information to be returned from the filler.

HL7-defined table of codes which specify someone or something other than the patient to be billed for a service.

HL7-defined table of codes which specify a status of results for an order.

HL7-defined table of codes which specify how (or whether) to transport a patient, when applicable, for an ordered service.

HL7-defined table of codes specifying the format of the observation value in the Observation Result (OBX).

HL7-defined table of codes which specify the maximum length of a query response that can be accepted by a requesting system, and are expressed as units of mesaure of query response objects.

Table of codes speciying a classification of general allergy categories (drug, food, pollen, etc.).

Table of codes which specify the general severity of an allergy.

Table of codes specifying the fiancial accommodation type of the bed or room which implies the rate to be used when occupied by a patient under specific medical conditions, which determines how it is billed. No suggested values.

Table of codes which specify categories of a patient's visit with respect to an individual institution's needs, and is expected to be different on a site-specific basis.

Table of codes which specify a relationship role that the next of kin/associated parties plays with regard to a patient. Also used in referrals, for example, it may be necessary to identify the contact representative at the clinic that issued a referral.

Table of coded codes that are used by an institution for the purpose of uniquely identifying a transaction based on the Transaction Type. For example, procedure, supply item, or test for charges; or to identify the payment medium for payments. No suggested values.

HL7-defined table of concepts which specify the different types of practitioners associated with this procedure. This set of codes is known to be incomplete. Note that as of v2.6, this table and the field(s) it was used in was replaced by table 443 used in the ROL segment.

Table of codes which indicate whether an insured person agreed to assign the insurance benefits to a healthcare provider. If so, the insurance will pay the provider directly.

HL7-defined table of codes specifying either Yes or No used in fields containing binary answers generally user-specified. The actual interpretation of Yes/No is context sensitive. Individual chapters will further refine the meaning of Yes/No in their specific context.

Table of codes which specify a party to which a claim should be mailed when claims are sent by mail.

Table of codes specifying the required employer information data for UB82 form locator 71. No suggested values.

Table of codes which specify the military branch. This field is defined by CMS or other regulatory agencies.

Table of codes which specify the military rank/grade of the patient. Australia: https://en.wikipedia.org/wiki/Australian_Defence_Force_ranks Canada: http://www.forces.gc.ca/en/honours-history-badges-insignia/rank.page United States: published in the Defense Travel Administrator's Manual, Appendix M: Military Rank/Civilian Pay Grade Abbreviations and Service Agency Names, http://www.defensetravel.dod.mil/Docs/Training/DTA_App_M.pdf

Table of codes which specify the military status of the patient. This field is defined by CMS or other regulatory agencies.

Table of codes specifying the reason a service is not covered. No suggested values.

Table of codes which specify the source of information about the insured's eligibility for benefits.

Table of codes which specify the room type.

Table of codes which specify amount quantity type.

Table of codes which specify the policy type.

HL7-defined table of codes which specify whether the amount is currency or a percentage.

Table of codes which specify whether the days are denied, pending or approved.

Table of codes which specify the category or type of patient for which this certification is requested.

Table of codes specifying the status of the second opinion. No suggested values.

Table of codes specifying if accompanying documentation has been received by the provider. No suggested values.

In the US, NUBC codes are generally used, see code system 2.16.840.1.113883.6.301.6; more information may be found at http://www.nubc.org/become.html

HL7-defined table of codes which identify conditions under which accept acknowledgments are required to be returned in response to a message, and required for enhanced acknowledgment mode.

HL7-defined table of codes that specify the type of date referred to in the other date fields in the QRF segment.

HL7-defined table of codes that specify the status type of objects selected in date range defined by QRF-2 and QRF-3.

HL7-defined table of codes that allow the specification of certain types of values within the date/time range.

HL7-defined table of codes which specify the type of diet.

HL7-defined table of codes which specify the type of dietary tray.

HL7-defined table of codes which specify whether substitutions are allowed and, if so, the type of substitutions allowed.

Table of codes which specify the route of administration.

HL7-defined table of codes that specify a body site from which a specimen is obtained.

Table of codes which specify the mechanical device used to aid in the administration of the drug or other treatment. Common examples are IV-sets of different types.

Table of codes which specify the specific method requested for the administration of the drug or treatment to the patient.

HL7-defined table of codes which specify the RX component type.

HL7-defined table of codes which specify the substitution status.

HL7-defined table of codes which specify one or more available priorities for performing the observation or test.

HL7-defined table of codes which specify the available priorities reporting the test results when the user is asked to specify the reporting priority independent of the processing priority.

HL7-defined table of codes which specify the parents and children for diagnostic studies, especially in microbiology, where the initial specimen (e.g., blood) is processed to produce results (e.g., the identity of the bacteria grown out of the culture). The process also produces new "specimens" (e.g., pure culture of staphylococcus, and E. coli), and these are studied by a second order process (bacterial sensitivities). The parents (e.g., blood culture) and children (e.g., penicillin MIC) are identified in such cases.

Table of codes specifying the information related to a person's country citizenship. No suggested values.

Table of codes specifying the military status assigned to a veteran. No suggested values.

Table of codes specifying whether this insurance works in conjunction with other insurance plans or if it provides independent coverage and payment of benefits regardless of other insurance that might be available to the patient.

Table of codes specifying an identification of a test battery, an entire functional procedure or study, a single test value (observation), multiple test batteries or functional procedures as an orderable unit (profile), or a single test value (observation) calculated from other independent observations, typically used as an indicator for Master Files.

HL7-defined table of codes which are represented by codes identifying HL7 Versions 2.x Master Files.

Table of codes that uniquely identify an application responsible for maintaining a master file of a particular type at a particular site. Not used after HL7 v2.2 No suggested values.

Table of codes specifying the degree to which special confidentiality protection should be applied to the observation.

HL7-defined table of codes specifying file-level events for master files.

HL7-defined table of codes specifying application response levels defined for a given Master File Message at the MFE segment level, and used for MFN-Master File Notification message.

HL7-defined table of codes specifying an action for a master file record.

Table of codes specifying the status of the requested update. Site-defined table, specific to each master file being updated via this transaction.

Table of codes specifying the staff person's sex. No suggested values.

HL7-defined table of codes specifying whether a person is currently a valid staff member.

Table of codes specifying the institution department to which this person reports or belongs. No suggested values.

HL7-defined table of codes specifying which of a group of multiple phone numbers is the preferred method of contact for this person.

Table of codes specifying the category of practitioner. No suggested values.

HL7-defined table of codes specifying how provider services are billed.

Table of codes specifying the individual responsible for triggering the event. No suggested values.

Table of codes further defining a patient's ancestry. In the US, a current use is to use these codes to report ethnicity in line with US federal standards for Hispanic origin.

HL7-defined table of codes specifying types or kinds of addresses.

HL7-defined table of codes declaring the general type of media data that is encoded.

HL7-defined table of concepts defining whether patient transportation preparations are in place.

Table of codes specifying the amount quantity class.

HL7-defined table of codes for types of names for persons.

HL7-defined table of codes for specifying a specific use of a telecommunication number. Best practice is to use this concept whenever a telecommunication number or access string is specified.

HL7-defined table of codes for specifying a type of telecommunication equipment. Best practice is to use this concept whenever a telecommunication number or access string for particular equipment is specified.

HL7-defined table of codes specifying the type of identififier.

Table of codes used to specify the type of name for an organization i.e., legal name, display name.

HL7-defined table of codes used to identify the intent for the dollar amount on a pricing transaction.

HL7-defined table of codes specifying actions to be applied for segments when an HL7 version 2 interface is operating in "action code mode" (a kind of update mode in the Standard).